You can either attach the end of the l2circuit to an LT interface, or a PS interface. https://www.google.com/amp/s/tgregory.org/2016/07/10/pseudowire-headend-term... https://www.juniper.net/documentation/en_US/junos/topics/concept/pseudowire-... https://www.juniper.net/documentation/en_US/junos/topics/usage-guidelines/se... On Sat, Mar 17, 2018, 9:27 AM Ben Bartsch <uwcableguy@gmail.com> wrote:
When we had Cisco ASR 920/903 and ASR9k, I could attach a layer 2 pseudowire endpoint on that device to a layer 3 BDI/BVI. I'm trying to do the same thing on a Juniper MX 480/960 and it does not appear to be supported (for LDP at least - MP-BGP might be supported). We could do either VPWS or VPLS on the PE device handoff to the CE (layer 2 only). JTAC has somewhat confirmed this is not supported for LDP, but they only do break/fix, not new config. We do not have professional services (we are broke).
Any Juniper routerheads out there that have seen this done using LDP without having to hairpin on the MX?
Thanks, y'all.
-ben