Hi Rob I couldn't get the ports working on SRX with low priority on the cluster. They always showed as down by protocol and never picked traffic. Can you put some light on the reason for that? Thanks On Sun, Jun 14, 2015 at 3:42 AM, Rob Greenwood <bilco105@gmail.com> wrote:
3. In case of SRX only one device runs at a time and ports of other SRX (slave) do not access traffic at all as long as it see the master is up via heartbeat. Not entirely accurate. The control plane (routing engine) is only active on one SRX at a time, however, the data plane is active on both. This means in your configuration, both ae1 and ae2 on the EX will be passing traffic to both SRXs.
It’s also worth noting you can create multiple redundancy groups and split them between both SRXs. If a device fails, all redundancy groups on the failed device will be migrated to the remaining one.
-Rob
-- Anurag Bhatia anuragbhatia.com Linkedin <http://in.linkedin.com/in/anuragbhatia21> | Twitter <https://twitter.com/anurag_bhatia> Skype: anuragbhatia.com PGP Key Fingerprint: 3115 677D 2E94 B696 651B 870C C06D D524 245E 58E2