This is what http://cio.cisco.com/go/fn is for. You need a "plus" version for VLAN support on the 3620. i.e. IP Plus, Enterprise Plus, etc. Your IP version below doesn't include the feature you're looking for. On Fri, 24 Oct 2003, Roman Volf wrote:
Show Version:
Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE (fc1)
flash image: System image file is "flash:c3620-i-mz.122-12a.bin"
I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but theres no encapsulation command. I've googled it up for about 2 hours and have come up with nothing... the following command sequence is documented dozens of times:
As shown on:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120... interface fastethernet slot/port.subinterface-number encapsulation dot1q vlanid
Any help would be appreciated.
---------------------------------------------------------------------- Jon Lewis *jlewis@lewis.org*| I route Senior Network Engineer | therefore you are Atlantic Net | _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________