Hey all, In early October our traffic levels from NetFlix went from about half Level3 and half Cogent - pretty well balanced - to all on Level3. Standard multihomed BGP setup with minimal TE if I can help it. I am starting to run into problems with a full gigabit port on Level3 and only 100-200mbps on Cogent at that colo. I tried padding, I even tried 65000:2906 bgp community, but it seems like if our level3 port is up NetFlix chooses it solely. How can I load balance NetFlix traffic across my two ports so that I am not paying for overages and/or forced to up to a 10G port immediately? I have 3 other providers at that colo and cannot find any mix of bgp tricks to get some of it thru our other providers. I notice AS2906 has a localpref of 86 - odd ... The 108.175.47.0/24 block seems to be using as 2906 so I thought a 65000:2906 wouldn't announce those prefixes to them at all. I have about 10 prefixes being announced so I could implement a no-export on some of them to load balance but that doesn't work. Thx, Sam BGP routing table entry for 108.175.47.0/24 Paths: (2 available, best #1) 2906 AS-path translation: { 108.175.47.0/24 } ear3.LosAngeles1 (metric 100000) Origin IGP, metric 30334, localpref 86, valid, internal, best Community: 2906:51081 North_America Lclprf_86 United_States Level3_Peer Los_Angeles Level3:10984 Originator: ear3.LosAngeles1 2906 AS-path translation: { 108.175.47.0/24 } ear3.LosAngeles1 (metric 100000) Origin IGP, metric 30334, localpref 86, valid, internal Community: 2906:51081 North_America Lclprf_86 United_States Level3_Peer Los_Angeles Level3:10984 Originator: ear3.LosAngeles1