I worked for Extreme, and I deployed a lot of X650 (24 10G ports) for DataCenter environment. The box is really good. In fact if you use the box at a layer 2 it is perfect, BUT DON'T use their BGP code, they never understood what is BGP :) Regards Fabien Le 27 janv. 2012 à 09:54, Grant Ridder a écrit :
I have experience with the Extreme's Alpine, Blackdiamond, x250, and x450 and i discovered that the command line is fairly different than Cisco, HP, or Dell. However, since they are a relatively small company with a small but strong customer base, their support is fairly good. I can't speak for 10G/40G implementations, but from my experiences, they support has a quick response time and they do quite a bit of lab replication to figure out the exact root cause.
-Grant
On Fri, Jan 27, 2012 at 2:32 AM, Erik Bais <ebais@a2b-internet.com> wrote:
We have a full purple network, so my answer for this would be Extreme Networks.
Check out the Lipis report on the X670 / x670v 48 port 10G 1U switches.
vs other vendor equipment :
http://www.extremenetworks.com/libraries/products/ExtremeX670V_Lippis%20Repo...
Regards, Erik Bais
Verstuurd vanaf mijn iPad
Op Jan 26, 2012 om 21:20 heeft Deric Kwok <deric.kwok2000@gmail.com> het volgende geschreven:
Hi all
I would like to have 10G switchrecommendaton Ipref software can test around 9.2G but we can have congestion over 6G in single port!
Thank you