I had to beat up on AT&T quite a bit, but instead of letting them "make notes", escalate to tier-2 because you can't reach work. Explain that you must have IPv6 to reach work to the tier-2. If they won't help demand to be escalated further. Your time on the phone costs them money. On Sat, Jul 18, 2015 at 6:45 AM, Seth Mos <seth.mos@dds.nl> wrote:
Ricky Beam schreef op 18-7-2015 om 1:14:
On Fri, 17 Jul 2015 06:25:26 -0400, Christopher Morrow <
morrowc.lists@gmail.com> wrote:
mean that your UBee has to do dhcpv6? (or the downstream thingy from the UBee has to do dhcpv6?)
The Ubee "router" is in bridge mode. Customers have ZERO access to the thing, even when it is running in routed mode. So I have no idea what it's trying to do. All I can say is no RAs are coming from it (through it/whatever) It *could* be it's blocking it -- it's multicast, so who knows what it's doing with it. Without RAs, nothing connected to it will even attempt IPv6 -- the RA being the indicator to use DHCP or not, and who's the router.
And further, when I tell my Cisco 1841 to do DHCP anyway, I get no answer.
So, the blanket statement that "it's ready" isn't true.
For a point of interest, the Ubee 320 and 321 wireless routers/modems are in use by Ziggo in the Netherlands.
Although they've rolled back the 320 modems to a older firmware, the 321 is still active on their IPv6 rollout. The problems were not strictly related to Ipv6 perse, but the newer firmware broken Voice on these all-the -things-in-one devices.
The 321 appears to be unaffected and is still active, although in just a few regions at this point of the rollout.
What's very specific about this rollout in relation to the above, is that Ziggo is currently only supporting IPv6 with the Ubee in router mode (with the wifi hotspot). The good news is that it also operates a DHCP-PD server so that you can connect your own router to the Ubee and still get IPv6 routed to you out of the /56 allocated to the customer.
For now, all the customers with the Ubee in bridge mode are SOL. It's not clear what the reason is, but Ubee in bridge mode with IPv6 is listed on the road map. If that's intentional policy or that the firmware isn't ready yet is not clear at this point.
Regards, Seth