Without more detail, I'm grasping at straws here, but see this recent thread about QoS and microbursts on the juniper-nsp list: https://puck.nether.net/pipermail/juniper-nsp/2016-November/033692.html Do you have ports with different speeds connected? Another idea: Are you using Spanning Tree Protocol and seeing lots of TCNs? On Tue, Nov 29, 2016 at 01:06:00AM -0800, TJ Trout wrote:
I recently upgraded my core network from 1G to 10G and after the upgrade I have noticed that my 10G switch during peak traffic (1500mbps, 100,000pps) seems to be dropping traffic for a split second across all ports and all vlans. I immediately replaced the switch with a different brand/model and the problem persists.
Sometimes traffic drops to zero, others it drops to 50%, problem is very random but seems to occur with much more frequency during high PPS (pushing high traffic / iperf does not induce problem)
Could this be MTU? I've tried flow control, hard code duplex, stp on/off etc
I'm at a loss any ideas?
TJ Trout Volt Broadband