On Wed, Sep 29, 2021 at 3:22 PM Owen DeLong <owen@delong.com> wrote:
On Sep 29, 2021, at 09:25, Victor Kuarsingh <victor@jvknet.com> wrote:
On Wed, Sep 29, 2021 at 10:55 AM Owen DeLong via NANOG <nanog@nanog.org> wrote:
Use SLAAC, allocate prefixes from both providers. If you are using multiple routers, set the priority of the preferred router to high in the RAs. If you’re using one router, set the preferred prefix as desired in the RAs.
Owen
I agree this works, but I assume that we would not consider this a consumer level solution (requires an administrator to make it work). It also assumes the local network policy allows for auto-addressing vs. requirement for DHCP.It shouldn’t require an administrator if there’s just one router. If there are two routers, I’d say we’re beyond the average consumer.
In the consumer world (Where a consumer has no idea who we are, what IP is and the Internet is a wireless thing they attach to).
I am only considering one router (consumer level stuff). Here is my example:- Mr/Ms/Ze. Smith is a consumer (lawyer) wants to work from home and buy a local cable service and/or DSL service, and/or xPON service
Isn't the easier (and cheaper) thing to do here is just use a VPN
to get behind the corpro firewall? Or as is probably happening
more and more there is no corpro network at all since everything
is outsourced on the net for smaller companies like your law firm.
The use cases that stuck in my mind for the justification for the
need for routing was for things like Zigbee and other low power
networks where you want them isolated from the chatter of the
local lan. Not saying that I agree with the justification, but
that was it iirc.
Mike