On Fri, May 8, 2015 at 3:41 PM, Chaim Rieger <chaim.rieger@gmail.com> wrote:
Best example I’ve found is located at http://jonsblog.lewis.org/ <http://jonsblog.lewis.org/>
I too ran out of space, Brocade, not Cisco though, and am looking to filter prefixes. did anybody do a more recent or updated filter list since 2008 ?
Offlist is fine.
Oh and happy friday to all.
I have had a piece long on the spike on how we implemented bcp38 for linux (openwrt) devices using the ipset facility. We had a different use case (preventing all possible internal rfc1918 network addresses from escaping, while still allowing punching through one layer of nat ), but the underlying ipset facility was easily extendible to actually do bcp38 and fast to use, so that is what we ended up calling the openwrt package. Please contact me offlist if you would like a peek at that piece, because the article had some structural problems and we never got around to finishing/publishing it, and I would like to.... has there been a bcp38 equivalent published for ipv6? Along the way source specific routing showed up for ipv6 and we ended up obsoleting the concept of an ipv6 global default route entirely on a linux based CPE router. see: http://arxiv.org/pdf/1403.0445.pdf and some relevant homenet wg stuff. d@nuc-client:~/babeld-1.6.0 $ ip -6 route default from 2001:558:6045:e9:251a:738a:ac86:eaf6 via fe80::28c6:8eff:febb:9ff0 dev eth0 proto babel metric 1024 default from 2601:9:4e00:4cb0::/60 via fe80::28c6:8eff:febb:9ff0 dev eth0 proto babel metric 1024 default from fde5:dfb9:df90:fff0::/60 via fe80::225:90ff:fef4:a5c5 dev eth0 proto babel metric 1024 So this box will not forward any ipv6 not in the from(src) table. -- Dave Täht https://plus.google.com/u/0/explore/makewififast