My mcast is rust, but look into CGMP. Switches flood multicasts out all ports by default. -- Colby Glass Network Engineer http://blog.alwaysthenetwork.com On Wed, May 12, 2010 at 12:07 PM, Rens <rens@autempspourmoi.be> wrote:
I have done some tests with multicast streams, sender & receivers all in the same layer 2 vlan, but I also have a pc with just wireshark and I can see all this traffic.
I can see that IGMP is enabled on all interfaces but do I need enable something else?
Vlan 200: -------- IGMP snooping : Enabled IGMPv2 immediate leave : Disabled Explicit host tracking : Enabled Multicast router learning mode : pim-dvmrp CGMP interoperability mode : IGMP_ONLY
-----Original Message----- From: Mikael Abrahamsson [mailto:swmike@swm.pp.se] Sent: mardi 11 mai 2010 15:43 To: Rens Cc: nanog@nanog.org Subject: Re: IPv4 Multicast
On Tue, 11 May 2010, Rens wrote:
Does anyone have any configuration examples for this or tutorials, everything on the net seems way to complex for my needs.
Multicast Quick-Start Configuration Guide
< http://www.cisco.com/en/US/tech/tk828/technologies_tech_note09186a008009482 1.shtml<http://www.cisco.com/en/US/tech/tk828/technologies_tech_note09186a008009482%0A1.shtml>
-- Mikael Abrahamsson email: swmike@swm.pp.se