On 1/11/2011 8:23 AM, Brandon Kim wrote:
For anyone that is following this thread/subject from yesterday, is it me or does it seem as if Cisco really isn't the choice for most SP's?
Just going on Cisco, Juniper, and Brocade. Cisco (especially ASR) makes the best DSL services aggregation feature set, Juniper a close second. Brocade doesn't have subscriber management functionality. The ASR is the cheapest subscriber management router I've been able to find (outside of 7200) and supports redundant processors. Brocade has the cheapest 10GE/100GE interfaces, does well in many middleman situations. It has limitations on 802.11ad which can be redesigned using p2p vpls if you need granular control at the SP edge. At last check, multi-topology for isis was still on roadmap but not implemented. This may have changed. Not sure. Juniper makes for excellent core routing, BGP and business customer edge. The functionality a Juniper does support is very robust. With the new MX line's trio chipset, they are continuing to push more edge/subscriber management features to the edge, all hardware supported. An additional point is always added to Cisco for supporting the used market. This drastically lowers purchase cost at a slightly higher support cost. Even an ASR, which is hard to find used, can keep it's cost low by adding used SPA interfaces. This generally means I look at Cisco for the subscriber management aggregation router, Juniper for the core, and Brocade for mpls switching in metro scenarios where the cost of Juniper at each of the metro pops makes for a very scary bill.
The concern I sense is that from Cisco's POV, it's their way or the highway. Not only do you pay a premium for smartnet, but if there's an issue, they are quick to point the finger. That is not service/support that I desire....
Premium for smartnet is offset by the fact that you can get smartnet on used gear at a fraction of the cost. Even if your used portion is only the linecards (which new often cost more than the chassis/switching fabric/dual routing engines), it's a huge cost savings for large deployments in broadband aggregation w/ subscriber management. To be honest, I use smartnet to upgrade the OS. I quit calling TAC after they failed to understand, much less help me with my eigrp over frame relay with automatic ISDN backup on route failure and re-establishment of eigrp over the ISDN. :)
Is this what everyone is sensing as well? I'm starting to look at Brocade now just to do some fair comparisons.....
Nothing wrong with brocade unless you want high end 802.1ad, multi-topology (may be fixed, or will soon) isis, subscriber management. There is no fair comparisons, though. Each box has it's strengths and weaknesses. Jack (currently using C/J, Brocade is spec'd if management will ever sign off on replacing those darn C5500s which are 10 years overdue to upgrade)