I plan on disabling FC on everything tonight, I've done that before but I want to be sure. Anything that can be done about the 2 x 1G peers trunking to the 10G router transition that can be fixed? should I be rate limiting the vlan for the peers at 1G so the 10G router isn't trying to send more than 1G? On Tue, Nov 29, 2016 at 1:47 PM, Michael Loftis <mloftis@wgops.com> wrote:
Yes it is absolutely possible to overrun the buffers. Any kind of backpressure (FC) from hosts, or 10G->1G transitions can easily cause it. Even if in a 10s window you're not over 1G if the 10G sender attempts to back to back too many frames in a row (Like say sendfile() API type calls) BOOM, dropping frames in the switch.
On Tue, Nov 29, 2016 at 1:28 PM, TJ Trout <tj@pcguys.us> wrote:
Luke;
All l2, no l3. only 4 vlans. 2 peers trunked to a router which trunks back to 2 devices (microwave backhauls).
Chuck;
All ports are 10g except the 2 peers are 1g and trunk back to a 10g port for the router wan
No TCN's
Brian;
I have tried a IBM G8124 and a Ubiquiti ES-16-XG both show same exact drops across all ports, makes me think it's a config issue. MTU, FC, something.
Andrew;
I have tried with FC disabled, but I will try that one more time.
Mikael;
Is it possible to over run the buffers of a 320gbps backplane switch with only 1.5gbps traffic? I think the switch is rated for 140m PPS and I'm only pushing 100k PPS