That's usually an OMCI control thing on the OLT (traffic shaping, qos). Do you have a specific question in mind? Josh Luthman 24/7 Help Desk: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jan 12, 2022 at 3:04 PM Dave Taht <dave.taht@gmail.com> wrote:
Does anyone have any insight as to the OS and overall capabilities of various ONT's? Traffic shaping/QoS and statistics?
On Wed, Jan 12, 2022 at 12:01 PM Shawn L via NANOG <nanog@nanog.org> wrote:
Yes. In our scenario the ONT is basically an ethernet bridge and
provides a SIP end-point for calls. There are models that have the router built-into them as well, but we've chosen not to use them at this point.
The battery we install is designed to run the voice portion for ~ 8
hours (customers are offered a longer run-time battery for an additional fee). There's some sensor wires from the ONT to the UPS so that we know when power is out, the battery is low or needs to be replaced, etc. It also tells the ONT to turn off ethernet services when the power is out to preserve battery for the phone portion. Though that behavior can be changed in software.
-----Original Message----- From: "Michael Thomas" <mike@mtcc.com> Sent: Wednesday, January 12, 2022 2:48pm To: nanog@nanog.org Subject: Re: home router battery backup
On 1/12/22 10:54 AM, Shawn L via NANOG wrote:
In $dayjob I work for a telco that deploys fiber to the home. If we are
providing voice services over fiber a battery backup is installed (we maintain) that powers the customer's phone in the event of a power outage. It does not power their router, etc. 99% of the customers do not install a UPS for their router, etc. We try to explain that to customers, but we still get calls that they can't get on the Internet when their power is out.
So your voice is part of the modem which isn't a router? I assume it
uses IP for voice.
Mike
-- I tried to build a better future, a few times: https://wayforward.archive.org/?site=https%3A%2F%2Fwww.icei.org
Dave Täht CEO, TekLibre, LLC