On Fri, Jan 01, 2010 at 02:52:33PM -0800, Mike wrote:
I am looking at the possibility of leasing a ~70 mile run of fiber. I don't have access to any mid point section for regeneration purposes, and so I am wondering what the chances that a 120km rated SFP would be able to light the path and provide stable connectivity. There are a lot of unknowns including # of splices, condition of the cable, or the actual dispersion index or other properties (until we actually get closer to leasing it). Its spare telco fibers in the same cable binder they are using interoffice transport, but there are regen huts along the way so it works for them but may not for us, and 'finding out' is potentially expensive. How would someone experienced go about determining the feasibillity of this concept and what options might there be? Replies online or off would be appreciated.
That shouldn't be too difficult, especially at only 1G (though pesonally I can't imagine why you would bother leasing dark fiber for that :P). There are several ways you could do it, including 120km+ rated SFPs (iirc there have been 200km SFPs out for a while too), an external optical amplifier (ideally you'd want to amp in the middle, but with a single channel you should be fine w/pre-amp), and a digital FEC wrapper to extend the receive sensitivity. Remember that the distance spec on optics is mostly a rough guideline, so depending on the fiber conditions and number of splices/panels along the way you could potentially expect to get the entire distance out of a "standard" 100km optic. -- Richard A Steenbergen <ras@e-gerbil.net> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)