Aaron, Do you know if the ACS5048 has any QOS limitations on this platform? Is each EVC on a ENNI able to have a separate QOS policy or is it port based? Just wondering how it would compare to the Cisco NCS5001\NCS5501 Thanks Erik Erik Sundberg Sr. Network Engineering Network Engineering Department p: 773.661.5532 c: 708.710.7419 e: esundberg@nitelusa.com Main: 888.450.2100 NOC 24/7: 866.892.0915 350 North Orleans Street, Suite 1300N Chicago, IL 60654 www.nitelusa.com Managed Telecom Services MPLS | Ethernet | Private Line | Internet | Voice | Security -----Original Message----- From: Aaron Gould [mailto:aaron1@gvtc.com] Sent: Friday, April 14, 2017 7:40 AM To: Erik Sundberg; nanog@nanog.org Subject: RE: 10G MetroE 1-2U Switch Yw Erik, also, since I'm fond/familiar with my newly deployed Juniper ACX5048's.... here's the MEF info...it's on there. https://www.mef.net/certification/equipment_details?company=001U0000007RJ6dI AG - Aaron ________________________________ CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error please notify the sender immediately by replying to this e-mail. You must destroy the original transmission and its attachments without reading or saving in any manner. Thank you.