int ethernet 0/0.0 encap 802.1q 532 You can't spec the encap on the parent interface. You must do it on the sub int. Owen --On Friday, October 24, 2003 02:49:15 AM -0700 Roman Volf <volfman@keystreams.com> wrote:
Show Version:
Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE (fc1)
flash image: System image file is "flash:c3620-i-mz.122-12a.bin"
I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but theres no encapsulation command. I've googled it up for about 2 hours and have come up with nothing... the following command sequence is documented dozens of times:
As shown on:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120... interface fastethernet slot/port.subinterface-number encapsulation dot1q vlanid
Any help would be appreciated.