I am scatter brained at the moment so I will kind of babble along some bullet points. We have been using Edgemarcs for a while and we love it for hosted VoIP situation. Their strength is VoIP. Being able to failover SIP servers and Internet access connection is great. You can configure it so you can still make internal calls when the SIP server is unavailable or your internet connection is down. I have not used the wireless model so I don't know much about that part. We had some problem with some VPN to Cisco when you have more than one subnet that needed to tunnel through. The annoying part is when you change anything on the device, it will say voice traffic may get interrupted. I have not gotten around to test what kind of affect it has on voice when you change simple configuration. But it kind of gets old when you get the message when you are changing the DHCP server setting and you know it has nothing to do with passing VoIP packets along. Their support is pretty good. This thing is basically a linux box with Asterisk and Swan rolled into one. Sometimes if you need to do things that can't be done from the GUI, you can get around it by using some basic Linux/Asterisk CLI/config files. But that can get ugly fast. If you have VoIP, it's great! If not, I usually stick with a Cisco ISR. On Thu, Oct 29, 2009 at 6:44 PM, Jaimie Livingston <jaimie@featuretel.com> wrote:
Has anyone had any recent direct experience with the EdgeWater EdgeMarc 4610W multi-service appliance used as a CPE device? I was recently handed a sales sheet on this swiss-army knife appliance, but there doesn't seem to be much publically available review of the beastie at the moment. If it is as advertised, it would be a very handy device as a CPE option...
Thanks,
Jaimie L.