Date: Thu, 11 Feb 1999 15:19:55 -0800 From: John Haskins <jhaskins@commserv.ucsb.edu> To: nanog@merit.edu Subject: Cisco GSR, Gig Ethernet config?
Our configuration: a GSR12008 with two interfaces, an OC12 ATM to the WAN and a gig ethernet to the campus, serving as a border drain.
Does someone have real experience configuring this box with SFCs and CSCs? Is a full switch fabric (3 SFCs) and second CSC required or desirable for the gig ethernet interface to work? Could we expect to
Yes, in order to use the GE linecard you need to have the full switch fabric installed. The second CSC is optional. Without it, the switch fabric is non-redundant. With it, you have 1:4 redundancy, since the CSC can back up either the CSC or any SFC.
support a second gig ethernet interface? So many questions!
When equipped with the full switch fabric, the 12008 is a 40Gb/s router. Each slot has a 5Gb/s connection to the switch matrix. Given that you are using one OC12 ATM linecard (1.2Gb/s total bandwidth) and one GE linecard (2Gb/s total bandwidth), you're not pushing slot limits or router limits. There's plenty of available capacity to support a second GE linecard. -rb ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com