Hi, We have a situation where we need to intercept certain IP traffic that is somewhere within a link of 300Mbit/s of traffic (GigabitEthernet). The setup that we built is as follows: router ^ | GE | fiber tap -------> cisco catalyst 3550 | | GE v switch The catalyst 3350 is receiving the traffic from router to switch and vice versa. Now, we'd like to filter all but certain IP's on the 3350 and switch this traffic to a FE port on that same 3550. Currently we've put the FE interface in SPAN mode, but that fills up the FE port completely (obviously). Is there any way to accomplish this? Regards, Stefan -- Stefan Baltus <stefan.baltus@xbn.nl> XB Networks B.V. Manager Engineering Televisieweg 2 telefoon: +31 36 5462400 1322 AC Almere fax: +31 36 5462424 The Netherlands