One of my clients deployed S3900s, both 24- and 48-port copper models, across half a dozen sites, and I did 99% of the config. Theoretically the 5800s are just a faster/beefier version but haven’t seen them in person. They… work, more or less. Some of the hardcoded limits are just stupid, like max 32 DHCP-relayed devices per L3 interface/VLAN and the 33rd client just doesn’t get DHCP. Either the intermediate carrier out there is stripping VLAN tags, or there’s something really weird with their trunking, not sure which yet. Both the GUI and CLI are required to configure a switch in practice – perhaps you can use the CLI exclusively if you’re an expert, but holy cow some of the config language is radically unintuitive. OTOH, even basic models have some advanced features like EAPS/ERPS in the base system. It’s very clear to me from the capabilities and language used in the original OS release that this model, at least, was originally targeting ILECs almost exclusively (e.g. console port == craft interface). Newer software releases have made them a little less obscure or difficult to work work. I can’t quite say “don’t buy them” but I sure wouldn’t recommend them, either. Broadly put: you get what you pay for! -Adam Adam Thompson Consultant, Infrastructure Services [MERLIN] 100 - 135 Innovation Drive Winnipeg, MB, R3T 6A8 (204) 977-6824 or 1-800-430-6404 (MB only) athompson@merlin.mb.ca<mailto:athompson@merlin.mb.ca> www.merlin.mb.ca<http://www.merlin.mb.ca/> From: NANOG <nanog-bounces+athompson=merlin.mb.ca@nanog.org> On Behalf Of Richard Angeletti Sent: Wednesday, April 13, 2022 2:11 PM To: nanog@nanog.org Subject: fs.com Ethernet switches Wondering if anyone on the list has any experiences with fs.com<http://fs.com> Ethernet switches that they are willing to share (good or bad)? We're looking for some cost effective L2 only 10Gb-T switches and their S58XX switches have come up as a potential option. Thanks, Rich