ok mark got it currently we are using the following DPCE Cards DPCE-R-4XGE-XFP DPCE-R-Q-4XGE-XFP When we tried using the command set chassis memory-enhanced route on the current Junos version 10.4 it says the command is not supported so we will need to upgrade the Junos to the newer version in order to try above command of it. On Thu, May 5, 2022 at 11:55 AM Mark Tinka via NANOG < admin@community.nanog.org> wrote:
Mark_Tinka4 <https://community.nanog.org/u/mark_tinka4> May 5
If memory serves, I believe the DPC used I-chip for Layer 3, and EZ-chip for Layer 2 (Ethernet framing + MAC look-up). Someone with a longer memory may need to chime in. Mark. ------------------------------
Visit Topic <https://community.nanog.org/t/strange-behavior-on-the-juniper-mx240/55213/21> to respond.
To unsubscribe from these emails, click here <https://community.nanog.org/email/unsubscribe/003092263321bdfde4f4ae64f65f0ca56dd025af66d8d99fe26a620253c2dc94> .