It can handle a few full tables, but the performance of an MX80/MX104 is nearly the same as the EX4200 switch.

Ryan
On Oct 16 2020, at 4:41 pm, Tony Wicks <tony@wicks.co.nz> wrote:
Well, there is always the MX104 (if you want redundancy) or MX80 if you don’t. That will give you 80gig wire speed just don’t load it up with more than one full table.

 

From: adamv0025@netconsultings.com <adamv0025@netconsultings.com>
Sent: Saturday, 17 October 2020 10:57 am
To: 'Tony Wicks' <tony@wicks.co.nz>
Cc: nanog@nanog.org
Subject: RE: cheap MPLS router recommendations
 

For this particular gig even the MX204 would be overkill in terms of price as well as performance.

Ideally something like 204 but with only those 8 10/1G ports (i.e. without the 4x100G ports)

 

adam

From: Tony Wicks <tony@wicks.co.nz>
Sent: Friday, October 16, 2020 10:36 PM
Subject: RE: cheap MPLS router recommendations
 

Juniper MX204, easy