communication prohibited by filter is just an ICMP response code, sadly Windows does not under it...... Type 3 (Destination unreachable) Code 13 (Communication Administratively Prohibited - generated if a router cannot forward a packet due to administrative filtering;) ICMP echo request for this ip seems to be filtered by Microsoft. TCP connection to port 80 is working fine. tcping wpa.one.microsoft.com Probing 94.245.126.107:80/tcp - Port is open - time=98.491ms Yang On Fri, Jan 11, 2013 at 2:01 AM, Nathan Anderson <nathana@fsr.com> wrote:
So the ICMP message "communication prohibited by filter" must be a normal response to ICMP ping through that gateway.
Unfortunately, it's not completely fixed yet, but I'm guessing by this measure of progress that they must be working on it. I now get HTTP 403 in response to any request I send to it. Tried to reactive this copy of Windows Server once more anyway, and now get "Online activation cannot be completed at this time." (Message number: 24579) Before, it simply claimed I must not have working internet connectivity.
-- Nathan
-----Original Message----- From: Scott Howard [mailto:scott@doc.net.au] Sent: Thursday, January 10, 2013 10:55 PM To: Ben Carleton Cc: Nathan Anderson; nanog@nanog.org Subject: Re: Microsoft Product Activation server reachability
Working now, tested from 3 hosts on different networks on both 80 and 443 :
$ telnet wpa.one.microsoft.com 443 Trying 94.245.126.107... Connected to wpa.one.microsoft.com. Escape character is '^]'.
Scott
On Fri, Jan 11, 2013 at 12:02 AM, Ben Carleton <carleton@vanoc.net> wrote:
----- Original Message ----- > From: "Nathan Anderson" <nathana@fsr.com> > To: "nanog@nanog.org" <nanog@nanog.org> > Sent: Thursday, January 10, 2013 11:24:16 PM > Subject: Microsoft Product Activation server reachability > > Anybody else having a problem reaching (what appears to be) the sole > Microsoft Product Activation server (wpa.one.microsoft.com)? > > $ ping wpa.one.microsoft.com > PING wpa.one.microsoft.com (94.245.126.107): 56 data bytes > 36 bytes from 213.199.189.41: Communication prohibited by filter > > I get this sourcing from our network, from AT&T 3G, and from ye residential > DSL connection located in the greater Seattle area. They aren't simply > source-filtering. Either that or they are source-filtering for 0.0.0.0/0. > > This is apparently the only server/IP they have set up to respond to these > requests. wpa.one.microsoft.com resolves to that IP via every DNS server > I've tried (so no round-robin A records), Microsoft products that need to > activate over the internet only try to resolve that FQDN, and I've looked > for others without success (wpa.two.microsoft.com isn't valid, for example). > > -- > Nathan Anderson > First Step Internet, LLC > nathana@fsr.com > >
I am seeing the same from NYC metro. According to MS (http://technet.microsoft.com/en-us/library/bb457159.aspx#ECAA), access to that host on 80 and 443 is all that should be required to activate. (and wpa.one.microsoft.com has no AAAA, go figure)
[ben@razor ~]$ ping wpa.one.microsoft.com
PING wpa.one.microsoft.com (94.245.126.107) 56(84) bytes of data.
From 213.199.189.41 icmp_seq=2 Packet filtered ^C --- wpa.one.microsoft.com ping statistics --- 6 packets transmitted, 0 received, +1 errors, 100% packet loss, time 5260ms
[ben@razor ~]$ telnet wpa.one.microsoft.com 80 Trying 94.245.126.107... ^C [ben@razor ~]$ telnet wpa.one.microsoft.com 443 Trying 94.245.126.107... ^C
-- Ben