On 4/4/2010 08:46, Jonathan Lassoff wrote:
Excerpts from John Peach's message of Sun Apr 04 08:17:28 -0700 2010:
On Sun, 4 Apr 2010 11:10:56 -0400 David Andersen <dga@cs.cmu.edu> wrote:
There are some classical cases of assigning the same MAC address to every machine in a batch, resetting the counter used to number them, etc.; unless shown otherwise, these are likely to be errors, not accidental collisions.
-Dave
On Apr 4, 2010, at 10:57 AM, jim deleskie wrote:
I've seen duplicate addresses in the wild in the past, I assume there is some amount of reuse, even though they are suppose to be unique.
-jim
On Sun, Apr 4, 2010 at 11:53 AM, A.B. Jr. <skandor@gmail.com> wrote:
Hi,
Lots of traffic recently about 64 bits being too short or too long.
What about mac addresses? Aren't they close to exhaustion? Should be. Or it is assumed that mac addresses are being widely reused throughout the world? All those low cost switches and wifi adapters DO use unique mac addresses?
Sun, for one, used to assign the same MAC address to every NIC in the same box.
I could see how that *could* work as long as each interface connected to a different LAN.
That was a logic Sun used. Every NIC would be connected to a different subnet, so duplicate MACs shouldn't be a problem. For the most part this worked, but some situations required a unique MAC per NIC, and Sun had a bit you could flip to turn this on. I believe it was an OpenBoot prom variable called "local-mac-address?" which you'd set to true if you wanted it to use each NICs MAC instead of the "system MAC". -Jim