We recently took possession of a building which part of it was used for a teleco room by a Cellular company. The floor looks like crap. So we were thinking about maybe just putting another new flooring on top. Currently it has some type of tile looking flooring. I have been told the the entry way into the building is Anti-static. However No idea on the actual data center flooring. I know in the past there have been talks about datacenter flooring. (Even Carpet if I recall). What I am wondering is does the actual datacenter flooring need to be like Static Dissipating. (Found something that does that for about $10.00 a Sqr foot). Or can it just be non static generating or like non conducting. Not quite sure the wording to use here. Any thoughts on this would be appreciated on or off the list. Sincerely, -- Mark Keymer
On Mon, 1 Oct 2012, Mark Keymer wrote:
I know in the past there have been talks about datacenter flooring. (Even Carpet if I recall). What I am wondering is does the actual datacenter flooring need to be like Static Dissipating. (Found something that does that for about $10.00 a Sqr foot). Or can it just be non static generating or like non conducting. Not quite sure the wording to use here.
We normally spec out VCT static dissipative floor tiling for our technical spaces that are not on raised flooring. jms
If you are thinking of VCT, try stained+polished concrete. Naturally grounded for low-humidity spaces, supports >3500PSI point loads, and much better looking.
I know in the past there have been talks about datacenter flooring. (Even Carpet if I recall). What I am wondering is does the actual datacenter flooring need to be like Static Dissipating. (Found something that does that for about $10.00 a Sqr foot). Or can it just be non static generating or like non conducting. Not quite sure the wording to use here.
We have operated with several types of floor in four locations over the last 15 years (Raised, VCT, painted, and polished concrete). Personally, I like the look of the polished concrete the best. It's relatively cheap and easy to do. Epoxy and VCT tend to get hurt over time and require considerably maintenance. If you want any pics, let me know.
From a static electricity aspect, we have never had a problem with any flooring ever - that is more about humidity level and proper grounding.
-----Original Message----- From: Mark Keymer [mailto:mark@viviotech.net] Sent: Monday, October 01, 2012 5:12 PM To: North American Network Operators' Group Subject: Data Center Flooring We recently took possession of a building which part of it was used for a teleco room by a Cellular company. The floor looks like crap. So we were thinking about maybe just putting another new flooring on top. Currently it has some type of tile looking flooring. I have been told the the entry way into the building is Anti-static. However No idea on the actual data center flooring. I know in the past there have been talks about datacenter flooring. (Even Carpet if I recall). What I am wondering is does the actual datacenter flooring need to be like Static Dissipating. (Found something that does that for about $10.00 a Sqr foot). Or can it just be non static generating or like non conducting. Not quite sure the wording to use here. Any thoughts on this would be appreciated on or off the list. Sincerely, -- Mark Keymer
Thank you for the information, both on and off-list. It has been very helpful. Also it looks likes the current tiles are VCT so no Asbestos currently. Sincerely, Mark Keymer On 10/2/2012 4:36 AM, Alex Rubenstein wrote:
We have operated with several types of floor in four locations over the last 15 years (Raised, VCT, painted, and polished concrete).
Personally, I like the look of the polished concrete the best. It's relatively cheap and easy to do. Epoxy and VCT tend to get hurt over time and require considerably maintenance. If you want any pics, let me know.
From a static electricity aspect, we have never had a problem with any flooring ever - that is more about humidity level and proper grounding.
-----Original Message----- From: Mark Keymer [mailto:mark@viviotech.net] Sent: Monday, October 01, 2012 5:12 PM To: North American Network Operators' Group Subject: Data Center Flooring
We recently took possession of a building which part of it was used for a teleco room by a Cellular company. The floor looks like crap. So we were thinking about maybe just putting another new flooring on top. Currently it has some type of tile looking flooring. I have been told the the entry way into the building is Anti-static. However No idea on the actual data center flooring.
I know in the past there have been talks about datacenter flooring. (Even Carpet if I recall). What I am wondering is does the actual datacenter flooring need to be like Static Dissipating. (Found something that does that for about $10.00 a Sqr foot). Or can it just be non static generating or like non conducting. Not quite sure the wording to use here.
Any thoughts on this would be appreciated on or off the list.
Sincerely,
-- Mark Keymer
On Tue, Oct 2, 2012 at 8:58 AM, Mark Keymer <mark@viviotech.net> wrote:
Thank you for the information, both on and off-list.
It has been very helpful.
Also it looks likes the current tiles are VCT so no Asbestos currently.
Sincerely,
Mark Keymer
On 10/2/2012 4:36 AM, Alex Rubenstein wrote:
We have operated with several types of floor in four locations over the last 15 years (Raised, VCT, painted, and polished concrete).
Personally, I like the look of the polished concrete the best. It's relatively cheap and easy to do. Epoxy and VCT tend to get hurt over time and require considerably maintenance. If you want any pics, let me know.
From a static electricity aspect, we have never had a problem with any flooring ever - that is more about humidity level and proper grounding.
-----Original Message----- From: Mark Keymer [mailto:mark@viviotech.net] Sent: Monday, October 01, 2012 5:12 PM To: North American Network Operators' Group Subject: Data Center Flooring
We recently took possession of a building which part of it was used for a teleco room by a Cellular company. The floor looks like crap. So we were thinking about maybe just putting another new flooring on top. Currently it has some type of tile looking flooring. I have been told the the entry way into the building is Anti-static. However No idea on the actual data center flooring.
I know in the past there have been talks about datacenter flooring. (Even Carpet if I recall). What I am wondering is does the actual datacenter flooring need to be like Static Dissipating. (Found something that does that for about $10.00 a Sqr foot). Or can it just be non static generating or like non conducting. Not quite sure the wording to use here.
Any thoughts on this would be appreciated on or off the list.
Sincerely,
-- Mark Keymer
If I may give a +1 to the concrete. Polishing is part of the install and often the harsh surface is intended for adhesives or shoe/tire grip. As mentioned the reduced cost is also great. -- ~ Andrew "lathama" Latham lathama@gmail.com http://lathama.net ~
participants (5)
-
Alex Rubenstein -
Andrew Latham -
David Storandt -
Justin M. Streiner -
Mark Keymer