Can those that ran switches with ExtremeWare on them remember that far back? I've got a Summit 400t-48 and I can't seem figure out how to get DDM information from the SFP. Did they have that ability? ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest-IX http://www.midwest-ix.com
Hi On 01/08/2016 23:39, Mike Hammett wrote:
Can those that ran switches with ExtremeWare on them remember that far back?
Just about.
I've got a Summit 400t-48 and I can't seem figure out how to get DDM information from the SFP. Did they have that ability?
They probably do, but only in the deep runic debug mode (nofeep) which was never a recommended practice unless you had the TAC on the 'phone. I have a couple of old 48si boxes hanging around in the lab LAN - Extremeware 7.8.4 certainly doesn't understand "show port n transceiver". I think this is XOS only. Paul.
To old.... feature was not supported on that code rev or model. Robert Jacobs | Network Director/Architect Direct: 832-615-7742 Main: 832-615-8000 Fax: 713-510-1650 5959 Corporate Dr. Suite 3300; Houston, TX 77036 A Certified Woman-Owned Business 24x7x365 Customer Support: 832-615-8000 | support@pslightwave.com This electronic message contains information from Phonoscope Lightwave which may be privileged and confidential. The information is intended to be for the use of individual(s) or entity named above. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify me by telephone or e-mail immediately. -----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Paul Thornton Sent: Tuesday, August 2, 2016 1:18 AM To: nanog@nanog.org Subject: Re: ExtremeWare Hi On 01/08/2016 23:39, Mike Hammett wrote:
Can those that ran switches with ExtremeWare on them remember that far back?
Just about.
I've got a Summit 400t-48 and I can't seem figure out how to get DDM information from the SFP. Did they have that ability?
They probably do, but only in the deep runic debug mode (nofeep) which was never a recommended practice unless you had the TAC on the 'phone. I have a couple of old 48si boxes hanging around in the lab LAN - Extremeware 7.8.4 certainly doesn't understand "show port n transceiver". I think this is XOS only. Paul.
Hey, Those are still current here =D But yes 12.x or 15.x XOS has support, but only for official EN optics. ----- Alain Hebert ahebert@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911 http://www.pubnix.net Fax: 514-990-9443 On 08/02/16 02:17, Paul Thornton wrote:
Hi
On 01/08/2016 23:39, Mike Hammett wrote:
Can those that ran switches with ExtremeWare on them remember that far back?
Just about.
I've got a Summit 400t-48 and I can't seem figure out how to get DDM information from the SFP. Did they have that ability?
They probably do, but only in the deep runic debug mode (nofeep) which was never a recommended practice unless you had the TAC on the 'phone. I have a couple of old 48si boxes hanging around in the lab LAN - Extremeware 7.8.4 certainly doesn't understand "show port n transceiver". I think this is XOS only.
Paul.
participants (4)
-
Alain Hebert -
Mike Hammett -
Paul Thornton -
Robert Jacobs