On 11/19/11 8:11 AM, Righa Shake wrote:
Hi,
Am having a problem that is buffling.
I recently changed a POS link encapsulation from PPP to Frame-relay. Since that time the POS interface keeps resetting from time to time.
On my BGP session am receiving cease notifications from my upstream provider.
The setup is such that we have a cisco on one end and a Juniper on the other.
interface POS0/0/0 mtu 4474
Does this match the other end?
no ip address no ip unreachables encapsulation frame-relay
You might try "encapsulation frame-relay ietf" for full compatibility with non-Cisco gear at the other end.
logging event link-status crc 32 pos scramble-atm frame-relay lmi-type ansi end
ROUTERshow run int pos0/0/0.101 Building configuration...
[snippage]
! interface POS0/0/0.101 point-to-point
LMI enq sent 81981, LMI stat recvd 77480, LMI upd recvd 0, DTE LMI up ^^^^^ ^^^^^ Something is dropping frames.
[snippage]
Last clearing of "show interface" counters 1w2d
[snippage]
6970870 runts, 2179 giants, 0 throttles 0 parity 892493293 input errors, 882184781 CRC, 0 frame, 0 overrun, 0 ignored, 3335463 abort
Lots of CRC line errors, runts, giants, LMI dropped frames. Kind of looks like you could have a physical problem with the link itself. -- Jay Hennigan - CCIE #7880 - Network Engineering - jay@impulse.net Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV