Hi Josh, Thanks for the reply. I should have mentioned that I have been feeding them manual corrections and opening support tickets the past few days, but they pride themselves on ignoring ISPs in favor of their own probes and ping times. I'm at a total loss at what to do since IPinfo ignores the geofeed, ignores all the other providers that are correct, and takes pride in being wrong because they ping the wrong end. I was hoping another point to point provider has had success in getting their data corrected with IPinfo. It's odd to me how IPinfo can be highly recommended by developers on this list, but their data is so far off. I can see how their method would work for an enterprise, BNG or cable provider, but not at all for an NNI ISP provider. Thanks again, Mark Blackford On Tue, Oct 21, 2025 at 9:16 PM Josh Luthman <josh@imaginenetworksllc.com> wrote:
If your issue is only with IPinfo, you should try to reach out to them. I'll say I've seen that name come up recently and they've had some pretty bad data/poor customer experiences.
On Tue, Oct 21, 2025 at 8:24 PM Mark Blackford via NANOG < nanog@lists.nanog.org> wrote:
Greetings,
Does anyone have any suggestions on how to get IPinfo to properly report Geolocation for NNI pint to point type circuits? I have a geofeed that they are ignoring, but I have two prevailing theories.
One - someone put our entire ARIN aggregate in it last month and now it overlaps everything in the feed. I read that overlapping prefixes cause confusion. I took it out of the feed today, but IPinfo is so secretive I have no idea if they will remove it.
Two, and the more likely theory based on their boast on how they beat the competitor by thousands of miles, is they are reporting on the wrong end based on their ping scans. They ping the hub end of a /31 and disregard the other end that is usually two to three states away. Therefore , they are the ones horrible off an their competitors are spot on.
Should I not be reporting the point to point /31 and only use he customer /32 end?
Any other advice in properly identifying the location for Ipinfo would be awesome. All the other providers seem to properly follow my geofeed, and I have no issues with them.
Thank you very much, Mark Blackford _______________________________________________ NANOG mailing list
https://lists.nanog.org/archives/list/nanog@lists.nanog.org/message/5FNHPXSU...