
EVPL (eline) should not be learning macs. So mac table size should be a non-issue. Unless someone somewhere has constructed a 2-part bridge domain (mef-speak, etree or elan of sorts) which would have mac learning, then Matt's question comes into play. -Aaron -----Original Message----- From: NANOG <nanog-bounces+aaron1=gvtc.com@nanog.org> On Behalf Of Matt Hoppes Sent: Friday, November 6, 2020 11:09 AM To: Jay Hennigan <jay@west.net>; NANOG list <nanog@nanog.org> Subject: Re: Strange connectivity issue Frontier EVPL Could you be running up against a MAC table limit on the circuit? On 11/6/20 11:59 AM, Jay Hennigan wrote:
We have a strange issue that defies logic. We have a NNI at our POP with Frontier serving as an aggregation circuit with different customers on different VLANs. It's working well to several customers.
Bringing up a new customer shows roughly half of the IP addresses unreachable across the link, as if there's some kind of load-balancing or hashing function that's mis-directing half of the traffic. It's consistent, if an address is reachable it's always reachable. If it's not reachable, it's never reachable. Everything ARPs fine.
The Frontier circuit is layer 2 so shouldn't care about IP addresses. Frontier tech shows no trouble. They changed the RAD device on-premise. We've triple-checked configurations, torn down and rebuilt subinterface, etc. with no joy.
Any suggestions?