
Based on the difficulties I have already experienced, I would bet on some default route (or for example 2001::/16) statically placed on your FIB pointing to an Upstream. Or even the simple absence of the default route (::/0) pointing to null. Em ter., 2 de mar. de 2021 às 11:21, Pirawat WATANAPONGSE via NANOG < nanog@nanog.org> escreveu:
Dear all,
We just turned on our RPKI Route Origin Validation yesterday, then something weird happened: [Reference: We are running NLnet Labs’ Routinator 3000, feeding a Cisco ASR 1000 Series router. I know, I know, we haven’t started a second validator yet.]
When we tested against the two testers: https://sg-pub.ripe.net/jasper/rpki-web-test/ and https://isbgpsafeyet.com/ the IPv4-only net-segment passed with flying color. [by the way, very sneaky you Cloudflare, registering the invalid block to the AS0 is a nice touch; I had to configure the router to really drop the invalid routes instead of just lowering their preference. Good show, mate!]
However, when we tested on dual-stack net-segment, the first test passed, but Cloudflare invalids sneak through on the IPv6 side, causing the second test to fail.
So, here comes the question: What rookie mistake(s) did I make? IPv4 and IPv6 configuration are supposed to be symmetry, right? Or did I miss something?
And since I already start asking: For a “second validator”, which choice is better: second copy of the same software, or different software altogether?
Thanks in advance for all comments and advices,
-- Pirawat.
-- Douglas Fernando Fischer Engº de Controle e Automação